Subject: Re: memguard & Imagine Date: Wed, 4 May 1994 01:38:47 -0400 (EDT) From: "Mr. Scott Krehbiel; ACS (PC)" <scott@umbc.edu> On Thu, 24 Feb 1994, Stephen Loughran wrote: > > >I just installed a program called Memguard IV by Ralf Thanner, it trys > >to prevent illegal memory accesses to certain areas. I found that it > >alerts me quite frequently when making changes in the attributes > >requester in Detail. Turning phong on & off usually will set it off as > >well as other things. What's up with this? > > I have noticed that the attribute requester does nasty things with > memory. I used to run enforcer on my A4000 to prevent memory trashing > my rogue code but i got so hacked off with this problem that i turned > it off. I haven't tried enforcer with v2.9, i'll try that later. i do > hope impulse have fixed this as i don't like programs that cause > enforcer hits :( > > steve > > Now I wonder if this type of thing could be what's crashing my machine! I'm running an A500 with a Derringer '030, 4.5 meg 16bit ram, 1meg 32 bit. (wb1.3, 512k chip) When I exit Imagine, it only shows half of my window for my hard drive, then my icon looks strange and staticky, then sometimes my machine will guru when I try closing windows or anything. The strange blitter problems are happening more and more frequently. Could this be from a bad Agnus, or could this be from Imagine doing strange things to my system? Scott -=> RETURN TO CONTENTS!<=-